As some users have the common problems in Setek Extender. So here are the list of those problems and their problems. Try the trouble shooting tips to resolve the problems and solutions.
Interference
Signal can be blocked by any of the other electronic devices such as microwaves, wireless phone etc. The signals can also be interfered by the walls metals items and even reflective objects such as glasses.
Solution
To stop such kind of problems please make sure that there is no such kind of interference taking place between the router and extender. It would result that the Setek WiFi extender setup would be incomplete.
Extender Limited range
Extenders have a limit of range; if that get’s crossed so the extender would not be able connect. As placing the router and extender too far from each other would result weaker connection.
Solution
So be sure that your extender and router are placed in the same room. If not then place the router and the extender in the same room. So the connection gets established.
Compatibility Issues
Incompatibilities would result in not connecting the router and extenders.
Solution
So please make sure that your extender is compatible with your router. Even ensure that both your devices are running on their latest versions.
Overloading
Connecting too much devices with the extender would result in slower speed or not connecting.
Solution
Disconnect the devices which are not being used as overloading is not good for the extender.
Outdated firmware
If your firmware is outdated of the extender it may lead to stability issues and security vulnerabilities. To update the firmware you need to follow these easy steps.
- Connect your router to your extender. The connection between the two is shown by the green LED light.
- Connect your mobile or your computer to the extender network.
- Open your web browser on your device. In your search bar type the IP address off the extender, which is 192.168.10.1?
- Enter your user name and the password which is present on the label box.
- Then click on login.
- Click on the firmware upgrade tab under the administration tab, on the website.
- The range extender will automatically tell you if there is any new update.
- Click on the update button to start the process.
- After the updating is done click on the save button.
While the firmware is getting updated do not switch the apps or close your mobile phone. If you are using a computer then do not open any new website until the updating is complete. Check the new updates carefully.
Restart Device
Sometimes by just restarting the extender and the router you can simply solve the issues. You can even unplug it and wait for ten seconds, then plug it again. Or try a new socket to plug in your extender.
Setek Extender Reset
If all the steps fail you can do then you can perform the factory reset. To reset you just need to locate the reset button at the behind of the extender. With the help of a paper clip or an object similar to it you press the button and hold it for a few seconds until the LED light starts to blink. Now you can start again by setting up your extender.
Website not opening
Be sure you have entered the correct website name ort the IP address. As the web browser would lead you to a fake website.
The conclusion
After reading this article we wish that all your troubles are solved. If still you are having kind of difficulties in any of the things you are always welcome to ask an expert for help.
