There are several problems that an Netgear Orbi router device can trouble you with like given below;
- Netgear Orbi router not working.
- Orbi router configuration fails.
- Login interface is not responding.
To solve, these problems, you should take a look at reasons and then how to solve them by following some solutions.
Reasons:
- The Ethernet cable can be loose, damaged, or cut, which connects the Orbi router and modem.
- The IP address and URL can be wrong, typed on the address bar of web browser, and configured the router wrong can trouble you with same issue.
- The browser can outdated and you can face trouble like 192.168.1.1 won’t work and you are not able to login Netgear router.
- Router and modem or any other networking device placed on a location surrounded by electronic devices.
Now, you will get know about how to solve the mentioned problem that is Netgear Orbi router not working.
Solutions Netgear Orbi router not working
Check Hardware
If the cable that is connecting the hardware of router and modem is damaged or cut, then you must replace the Ethernet cable. Then, you must also check the connecting ports, which should be LAN port of the modem and WAN port of the Netgear Orbi router.
Choose Another Location
The optimal location of the Orbi WiFi router and the modem plays an important role in network reliability in your house. The location must be far from the electronic devices in your house.
Reboot Netgear Orbi Router
Rebooting the router will refresh its settings. To start the restart process, you just have to follow some steps given below;
- First, you can restart the device by pressing the power button twice.
- Second, you can reboot the device by plugging out and in the power cord in to wall socket.
Use Updated Browser
What if the browser is outdated and 192.168.1.1 not working, then you have to use the updated browser. To updated the browser you just have to use these below given steps;
- Go to the Browser Settings> About> and then click on the UPDATE button.
At Last Reset Netgear Orbi Router
Resetting the WiFi router will delete or cleared out all the data and settings. You can use the reset process to dispel the ‘192.168.1.1 won’t work, or Orbi router not working’ problem. Just take a look how to reset the router;
- Find the router RESET pinhole button.
- It will be at the back of the WiFi router.
- Just use the pin or a sharp object to long press the button.
- After pressing the button, the reset process will start.
- After resetting the router, you should perform Netgear Orbi Setup again and re-configure the settings.
How to Setup Netgear Orbi Router Again After Reset?
- Connect the Orbi router with the modem with the help of the Ethernet cable.
- Then, connect it with the computer or laptop and by using the web browser search the URL orbilogin.net or IP address 192.168.1.1.
- You will reach to the interface page, where you have to enter the username and password.
The credentials are given in the user manual or on the label of the hub.
- Enter the admin credentials and Log In to the interface dashboard; here you can re-setup your Orbi mesh system.
The End Section
The Orbi WiFi setup and configuration is so easy to done, but if you do it carelessly, then you can face troubles like Netgear Orbi router not working or login not working problem. Here, you will get to know how to solve the Orbi not working problem with the help of simple solutions given above.
