Amped wireless extenders are working wonders among netizens due to their marvelous features. But, it has been found that some users after performing Amped wireless setup are facing the 2.4GHz WiFi not working issue.
Have you also been facing the same issue for a long time? If yes, then consider giving a read to this post. Here, you will learn several troubleshooting techniques to get it resolved like it was never in existence. Stick to reading.
Fixed: Amped Extender 2.4GHz WiFi Not Working
Bring the Extender Close to the Router
Are your Amped extender and the host router sharing an optimal distance? Don’t know what optimal distance is? Well, it is the magnitude that does not exceed that of the boundary line of the signals emitted by your host router.
Thus, if you haven’t placed your Amped extender close to the router, consider reducing the distance between them. But, consider not making the distance zero. Else, you’ll soon find yourself struggling with other Amped extender issues.
Check the Ethernet Cable
Sometimes, a damaged Ethernet cable is the reason why your Amped extender 2.4GHz WiFi stops working. FYI, the Ethernet cable is a source of the direct connection between your Amped extender and the main router. Therefore, its damage-free status is a must requirement.
In case the Ethernet cable you are using is found damaged from anywhere, consider replacing it with a new one. In addition, make sure that the connection is nothing but finger-tight.
Update the Firmware
At times, users ignore updating the firmware of their Amped extender which leads them to various issues similar to the one you are currently facing. Therefore, you should never ignore updating the firmware of your extender via https://setup.ampedwireless.com.
To update the firmware you need to access the Amped extender’s dashboard, locate the Management tab and click the Upgrade Firmware option. On the Upgrade Firmware window, click the Check Now button. Let your extender detect whether a firmware update is pending or not. If yes, then follow the on-screen instructions.
Reboot Your Amped Extender
Do you know that technical glitches also tend to create the issue you are currently facing? Well, now you know. Like every other networking kiosk, your Amped extender can also become a victim of technical glitches. But, the good thing is that you can get rid of them by rebooting your extender.
For this, first of all, switch off your extender, unplug it from the power outlet, let it rest for as long as you can, re-plug it, and switch it on. Now, see to it whether the 2.4GHz WiFi has started working or not. If you are still empty-handed, give a shot at the next troubleshooting tip.
Relocate Your Extender
Only a handful of users place their Amped extenders at the proper location. The reason is partial knowledge. If you want your Amped extender to work efficiently, it must not sit in a WiFi interference zone. Know that the extender won’t be able to propagate WiFi signals properly in an interference zone.
Thus, you need to change the location of your wireless extender. Your extender must be placed away from mirrors, cellular phones, televisions, fish tanks, metal doors, treadmills, microwave ovens, refrigerators, etc. Additionally, your Amped extender should not lie near concrete walls or in a corner.
The Bottom Line
That’s all you can do if your Amped extender’s 2.4GHz WiFi stops working. We hope that after trying all of these hacks, you will be able to bring back your extender’s frequency band to the normal working state. However, if you are still having no luck, it is suggested that you take your extender back to the factory default mode and set it up using the Amped wireless extender login page. Thanks for reading the post.