You’ve invested in an Arlo camera to keep an eye on your home. But suddenly, it’s not detecting motion as it should. Don’t worry – we’ve got some simple solutions to get your Arlo camera back on track and it will capture every movement. This is to inform you that the troubleshooting process will require Arlo account login info. Thus, you have to keep their note. Read on.
Troubleshooting: Arlo Camera Not Detecting Motion
- Check the Location of Your Camera
First things first, ensure that your Arlo camera is positioned correctly. Make sure it’s not obstructed by objects like trees, bushes, or glare from lights. Ensure there’s nothing blocking its view and that it’s placed within the recommended range for motion detection.
- Adjust Motion Detection Settings
Sometimes, the sensitivity settings on your Arlo camera might need a tweak. Log in to your Arlo account via the app or web portal and navigate to the camera settings. Look for the motion detection settings and adjust the sensitivity level. Experiment with different sensitivity levels to find the optimal setting for your environment.
- Check the Camera Placement Mode
Arlo cameras offer different modes for different scenarios, such as armed, disarmed, or schedule mode. Check that your camera is set to the appropriate mode for motion detection. If it’s in disarmed mode, it won’t detect motion. Switch it to armed mode to enable motion detection.
- Check Camera Battery
Low battery levels can affect the performance of your Arlo camera, including motion detection. Ensure that your camera’s battery is sufficiently charged or connected to a power source if it’s wired. If the battery is low, recharge it or replace it with a fully charged one.
- Clear Camera’s Field of View
Ensure that the camera’s lens is clean and free from any dirt, dust, or smudges. A dirty lens can interfere with motion detection capabilities. Use a soft, dry cloth to gently clean the lens and remove any debris that might be obstructing its view.
- Update the Camera Firmware
Outdated firmware can sometimes cause issues with motion detection. Go to arlo.com and check if there are any firmware updates available for your Arlo camera and install them if necessary. Firmware updates often include bug fixes and performance improvements that can address issues with motion detection.
- Test Motion Detection
Perform a manual test of the motion detection feature to ensure it’s functioning properly. Walk in front of the camera’s field of view and see if it detects motion and triggers a recording. If it doesn’t, try adjusting the camera’s angle or sensitivity settings until it responds to motion.
- Reset Camera
As a last resort, you can try resetting your Arlo camera to its factory settings. Keep in mind that this will erase any custom settings or configurations you’ve made. To reset the camera, locate the Sync button (usually located on the bottom or back of the camera) and hold it down for about 10 seconds. Release the button, and the camera will reboot.
You are also supposed to ensure that your Arlo camera’s motion detection settings are not too high either. The camera must be located in a clean area. You must check the camera’s sound detection settings also. They can also result in the problem you are facing. Do not forget to reboot the camera on a regular basis to improve its performance.
In Conclusion
An Arlo camera not detecting motion can be frustrating. But, with these simple solutions, you can troubleshoot the issue and get your camera back to detecting motion effectively. Remember to check camera placement, adjust settings, and ensure the camera’s lens is clean. If you follow these troubleshooting tips carefully, you’ll have your Arlo camera capturing every movement easily.
