Linksys smart devices are one of the best networking devices that provides user speedy internet and reliability in network.
To connect the Linksys router to the Netgear modem, you have to use the Ethernet cable, which will be inserted in to router WAN port and modem LAN port. Then, you have to start the Linksys Smart WiFi login process.
- Place the router close to the home Netgear modem or ISP.
- Use the cable and insert it in to the router WAN and modem LAN port.
- Supply the electricity to the router and modem by connecting their power cord to the wall socket.
Now, after powering up the router and modem, you have to configure the Linksys WiFi smart router with the help of computer.
Linksys Router Setup with Computer
To adjust the settings of the Linksys WiFi router, you just have to the connect your computer to the extender network, and follow some steps;
- Connect your computer to the extender with LAN cable.
- Then, go to the updated web browser and enter http://192.168.1.1 or http://linksyssmartwifi.com and search.
- By searching the URL or IP address you will reach to the login page of the admin interface.
- On this page, you have to enter the username and password on the fields and click on Log In button.
- Interface dashboard will open up on the computer screen, where you can easily adjust the settings.
You must adjust the frequency settings, change WiFi password, and change admin login credentials by login to Linksys router.
Hope, you have configured the router and now, you should take a look at some of the tips and solutions to make sure the setup is error free.
Troubleshooting Tips and Solutions
We will provide five major tips to make the setup, and login process error free and make your network secure.
Check Router to Modem Connection
Router to modem connection helps to receive and send WiFi signals. If the router is not receiving signals, then the extender also won’t work and you won’t able to connect with internet.
So, make sure the modem and router is connected and is bonded strongly via Ethernet cable.
Don’t Use Damaged Cables
Connected the router and modem with the help of the cable, then make sure that the Ethernet cable is not damaged and is not cut.
Use Optimal Spot for Placement
The router placement is also plays an important role to make the network connection strong. So, you have to choose an optimal location for router in your house. It should be far from the electronic devices like microwave ovens, or microphones.
Reboot
The other tip to solve the any problem relate to the Linksys WiFi router device is to reboot it. Just have a look how to restart the device;
- Plug out its power cord from the wall socket and plug it again.
- Turn it off and again power it on by pressing the power button.
Reset
You should reset the Linksys Smart WiFi router device to fix the mentioned problem;
- To reset the device, you have to find the reset pinhole button on the back and with the help of the pin or sharp object.
After that, all the settings and data will be deleted and you have to setup the router again by logging in to the Linksyssmartwifi interface.
The End Note
Here, you have learned about how to setup the Linksys smart router with the home Netgear modem with the help of simple instructions.
