Netgear Orbi mesh system is one of the networking devices which you can use to eliminate WiFi dead zones in your home. You will also see Orbi light colors that represent its status. you just have to connect by following steps;
- Place the router close to the home Netgear modem or ISP.
- Use the cable and insert it in to the router WAN and modem LAN port.
- Supply the electricity to the router and modem by connecting their power cord to the wall socket.
But, you can also face troubles like Orbi router not working or not connecting to the internet, so here you will get to know the reasons and solution of the problems.
Reasons Why Orbi Not Working
- If Sync method is used for the connection and Orbi router and Satellites are powered on out of reach, then you will face problems.
- If the Ethernet cable is used to connect devices, if it is damage, then you will get to face this mentioned trouble.
- Router is not receiving internet signals from modem, then you will get in to trouble like Orbi router is not connecting to internet.
- Orbi router is not configured and showing Orbi light colors like red, this can be a possible reasons.
- So, these were the possible reasons why your Orbi router not working. Now, you can take a look how to solve the router not working problem.
Solutions and Tips
Check Router to Modem Connection
Router to modem connection helps to receive and send WiFi signals. If the router is not receiving signals, then the extender also won’t work and you won’t able to connect with internet.
So, make sure the modem and router is connected and is bonded strongly via Ethernet cable.
Don’t Use Damaged Cables
Connected the router and modem with the help of the cable, then make sure that the Ethernet cable is not damaged and is not cut.
Use Optimal Spot for Placement
The router placement is also plays an important role to make the network connection strong. So, you have to choose an optimal location for router in your house. It should be far from the electronic devices like microwave ovens, or microphones.
Reboot
The other tip to solve the any problem relate to the Orbi WiFi router device is to reboot it. Just have a look how to restart the device;
- Plug out its power cord from the wall socket and plug it again.
- Turn it off and again power it on by pressing the power button.
Reset
You should reset the Orbi Smart WiFi router device to fix the mentioned problem;
- To reset the device, you have to find the reset pinhole button on the back and with the help of the pin or sharp object.
After that, all the settings and data will be deleted and you have to setup the router again by logging in to the orbilogin.net interface.
- Connect your computer to the extender with LAN cable.
- Then, go to the updated web browser and enter http://192.168.1.1 or http://orbilogin.net and search.
- By searching the URL or IP address you will reach to the login page of the admin interface.
- On this page, you have to enter the username and password on the fields and click on Log In button.
- Interface dashboard will open up on the computer screen, where you can easily adjust the settings.
The End Lines
Here, you have seen and learned about what are the reasons why your Orbi router not working or not connecting to the internet. We have also shared how to troubleshoot the mentioned problem.
